Description
The 26 watt Fluorescent Work Light has an enclosure constructed of two red plastic moulded halves held together by 6 screws.
The top half of the enclosure contains two 13 W PL type fluorescent lamps, which are covered by a clear plastic clip-on lens at the front. The lower half of the enclosure is the handle, which includes two black rocker switches on the rear and a 3 pin socket-outlet on the heel of the enclosure together with the supply cord entry.
The work light is provided with adjustable hooks top and bottom and a magnetic clip, to allow the option of other than handheld.
The work light is identified by the marking "26 watt Fluorescent Work Light 240V, 50Hz, AC.13amps"
Approximate overall dimensions (mm):- 370 H X 100 W X 80 D.
The front of the 26 watt Fluorescent Work Light packaging is marked with "26 watt Fluorescent Work Light", "25-foot, 16 gauge cord",
- "Two twin 13 Watt fluorescent lamps",
- "Individual on/off switch for each lamp",
- "Adjustable magnet",
- "Grounded outlet in handle",
- "240V 60Hz 13amps 16guage" and
- "CE approved"
The supply plug is an approved two pin, flat pin, insulated pin 10 A plug, and an approved 2 0.75 mm² core supply cord compatible with the New Zealand plug/socket system.
A sample of the with "26 watt Fluorescent Work Light" was obtained from a "Trade Tools Ltd, Penrose, Auckland", although the with "26 watt Fluorescent Work Light" may also be available elsewhere in New Zealand.
Back to Top